Compression / push-fit
HDPE Compression Fittings
Mechanical compression fittings for HDPE pipe up to 110 mm: couplers, elbows, tees, adaptors and saddles that assemble by hand.
Ø20–110PN16No tools fused
02Technical specifications
The datasheet.
Conforms to Compression / push-fit
Full specification range available on request. Tell us your application and we will confirm sizes, classes and fittings. Ask our engineers →
Applications
Compression fittings are how small and medium HDPE lines are connected where a fusion machine is not on site. The body grips and seals the pipe with a hand-tightened nut, so crews can couple runs, take branches off a main and adapt to threaded valves and meters quickly. Because the range is matched to our pipe, the seal is dependable and the same fittings serve new installation, repairs and emergency tie-ins.
WaterIrrigationJointing
Industries served
03Ordering & specifying
How to specify HDPE Compression Fittings.
- 01Match the fitting to the pipe outside diameter and class (up to 110 mm, PN16).
- 02Pick the body type: coupler, elbow, tee, reducer, end cap, or male/female threaded adaptor.
- 03Use saddles for branch take-offs on a live or pressurised main.
- 04Assemble by hand or with a strap wrench, no heat or fusion gear required.
- 05Confirm the available size range and fitting types with our team.
Not sure which class or size? Ask our engineers, and we will confirm the spec for your project.
Key benefits
01
Assemble by hand, no fusion equipment on site
02
Couplers, elbows, tees, adaptors and saddles in one range
03
Matched to our HDPE pipe for first-time seating
Standards & certifications
Manufactured to standard, tested to confirm it.
Our couplers and fittings are sized to match our KS ISO pipe and conduit systems, with dimensional checks and batch traceability so the interfaces fit and seal first time.
We state conformance only for the lines we manufacture, and present products as built to KEBS-referenced standards. Where a KEBS mark applies to a line, the certificate is shown on the quality page.
Request a quote
Get pricing for HDPE Compression Fittings.
Tell us your sizes, pressure class and quantities, and we will respond with availability and a quote.
05Frequently asked
HDPE Compression Fittings, questions answered.
Do I need tools to fit them?+
No fusion equipment. Compression joints assemble by hand or with a strap wrench, which is why they suit field installation, repairs and tie-ins.
What sizes do they cover?+
HDPE pipe from about 20 to 110 mm at PN16. Above that, use electrofusion or butt fusion. Ask us for the exact range.
Are they matched to your pipe?+
Yes. Couplers, elbows, tees, adaptors and saddles are sized to our HDPE pipe so the interfaces fit and seal correctly.
Can I take a branch off a pressurised main?+
Yes, with the correct saddle and procedure. Talk to our team for branch take-offs on live lines.
Related products
